How To Repair A Leak In Ehhaust Header

Do you experience fume and hear loud noise under the car at startup? Those are all signs of exhaust pipage hole. Nosotros will endeavor to repair of exhaust pipe with a steel wrap Holts Gun Gum Flexiwrap. It is more endeavour to repair exhaust pipe DIY so you need go to repair shop if y'all want well-washed upshot.

Please seethe hole to patch. So chock the rear of the vehicle. Apply the hand restriction and put the vehicle on special jack stands.

Warning: before you go underneath the vehicle y'all demand supported the vehicle by at to the lowest degree ii supports.

We volition use the Holts Gun Gum Flexiwrap. If you want good result yous need step by pace to go to the goal.

Repair a hole or a leak in exhaust pipe

Step №i. Loosen the wrap;

Step №2. Remove all lose clay and rust of expanse to be repaired;

Stride №3. Exam the wrap on the exhaust pipage

Step №4. For ends and bends repair, form the steel wrap to the contours of the area to be repaired.

Step №five. Remove the wrap and apply the paste. I am using protective gloves for this.

Step №6. Refit the wrap and tighten the hose clench.

Step №7. Apply a second coat of paste to the edges of the wrap.

End. Leave 12 hours to harden or run the engine slowly for 20-30 minutes.

After paste hardening, think jack and jack stand and outset the engine to check that there is no more than leak. If you don`t feel whatever more leak the exhaust pipage is serviceable.

Source: https://www.newkidscar.com/car-repair/how-to-repair-a-hole-or-a-leak-in-exhaust-pipe-without-dismantling/

Posted by: lopezproff1944.blogspot.com

Share this post