How To Repair Rip In Nylon Down Jacket

Are yous sick of feathers leaking from your down jacket? Need to gear up a burn hole in your puffy? We take a simple fix to rips, tears, and holes in down or nylon jackets, ski pants and snow gloves. From GORE-TEX® rainwear to The N Face® parka, hands patch your favorite waterproof garments without dampening its look or way. All you need is some clear or blackness nylon repair record or gear patches.

Wash & DRY

Earlier making a patch repair, clean down and nylon gear showtime. Using our Revivex formulas, hardworking ski jackets, pants, and rainwear stay fresh and volition proceed to protect us from the elements. Read our blog to learn how to wash GORE-TEX fabrics or find out how to wash down jackets so they go on performing at their best.

PEEL-AND-STICK PATCH REPAIR

• Tenacious Tape Mini Patches or Tenacious Tape Gear Patches
• Isopropyl Alcohol

Estimated Time: 5 minutes

1. Make clean the repair expanse with isopropyl alcohol to remove any dirt or body oils that may foreclose a good bail. Trim any loose threads or feathers.
2. Peel off the bankroll on a Tenacious Record Mini Patch or Gear Patch and apply it over the rip, tear, or pigsty. Patch should overlap tear by 0.v" (12 mm) in all directions.
3. Apply pressure from the middle out. Polish out whatsoever bubbles and ensure the edges lay flat.

If you do a repair before cleaning the gear, wait at to the lowest degree 24 hours for the Tenacious Tape patch to adhere properly earlier washing it.

PRO TIP: Make your repair nearly invisible by using articulate, black, red or yellow Tenacious Tape to match the material. If you're patching a hardshell jacket, put the patch on the within.

Fe-ON PATCH REPAIR

• Tenacious Record GORE-TEX Material Patches
• Iron, Hair Dryer, or Machine Dryer

Estimated Fourth dimension: 15 minutes

When extra forcefulness is required especially for loftier-wear areas (e.g., cuffs and knees), employ estrus on the Tenacious Tape Mini or Gear Patch later on application on the outerwear. For repairs on waterproof-breathable fabric that become more moisture and scrapes, apply Tenacious Tape GORE-TEX Fabric Patches with estrus.

1. Make clean and dry area to be repaired.
2. Peel off GORE-TEX Textile Patch backing and apply to damaged expanse.
3. Utilise pressure from center out to remove air bubbles.
4. Set the iron to medium or permanent-press oestrus. Employ moderate pressure and circular motion for thirty seconds to estrus evenly.
5. (Optional) Instead of an atomic number 26, use a hair dryer or tumble the garment in a car dryer for 30 minutes on regular setting to strengthen the repair patch.

PRO TIP: Cut Tenacious Tape to size by rounding out the edges to foreclose the patch from snagging or peeling off before it fully bonds to the cloth.

Keeping down puffy coats, nylon jackets, and GORE-TEX gear in tip-height shape is simple with Tenacious Record repair patches and Revivex cleaners.

Source: https://www.gearaid.com/blogs/learn/down-jacket-repair-how-to

Posted by: lopezproff1944.blogspot.com

Share this post